Rea u amohela liwebsaeteng tsa rona!

0.08mm Enamelled NICR alloy NiCr20AlSi/nichrome Karma Resistance Heating resistor terata

Tlhaloso e Khutšoanyane:

lithapo tsa ho hanyetsa tse enameled li 'nile tsa sebelisoa ka bophara bakeng sa li-resistors tse tloaelehileng, koloi
likarolo, li-resistors tse matsoelintsoeke, joalo-joalo ho sebelisa ts'ebetso ea ho kenya letsoho e loketseng lits'ebetso tsena, ho nka monyetla ka botlalo ba likarolo tse ikhethang tsa ho roala enamel.

Ho feta moo, re tla etsa insuela ea enamel ea terata ea tšepe ea bohlokoa joalo ka terata ea silevera le platinamo ka taelo. Ka kopo, sebelisa tlhahiso ena ka odara.


  • Nomoro ea mohlala:karma
  • Resistivity:1.33 ohm mm2/m
  • mohlala oa odara:amoheloa
  • Boemo ba Mocheso:155C, 180C, 200C,220C joalo-joalo.
  • Diameter:0.02-10.0mm
  • maemo:GB/ASTM/JIS/BIS/DIN
  • Khoutu ea HS:75052200
  • Lintlha tsa Sehlahisoa

    LBH

    Li-tag tsa Sehlahisoa

    Thepa ea Karma

    lebitso khoutu Sebopeho se ka Sehloohong (%) Standard

     

    Cr Al Fe Ni
    Karma 6J22 19-21 2.5~3.2 2.0~3.0 bal. JB/T 5328

     

    Lebitso Khoutu (20ºC)
    Ho hanyetsa
    (μΩ.m)
    (20ºC)
    Temp. Coeff.Oa Khanyetso
    (αX10-6/ºC)
    (0~100ºC)
    ThermalEMF vs.

    Koporo
    (μv/ºC)

    Max.sebetsa
    Mocheso.(ºC)
    (%)
    Elongation
    (N/mm2)
    Tensile
    Matla
    Standard
    Karma 6J22 1.33±0.07 ≤±20 ≤2.5 ≤300 >7 ≥780 JB/T 5328

    4. Likarolo tse ikhethang tsa mohala oa ho hanyetsa Karma

    1) Ho qala ka Nickel Chromium terata ea mocheso oa motlakase oa Sehlopha sa 1, re nkile sebaka sa Ni ka
    Al le likarolo tse ling, 'me kahoo e fihletsoe ka mokhoa o nepahetseng oa ho hanyetsa thepa e ntlafalitsoeng
    ho hanyetsa mocheso coefficient le mocheso electromotive matla khahlanong le koporo.
    Ka keketso ea Al, re atlehile ho etsa hore molumo oa resistivity 1.2 o be moholo
    ho feta Nickel Chromium terata ea mocheso ea motlakase ea Sehlopha sa 1 le matla a thata ka makhetlo a 1.3.

    2) Coefficient ea bobeli ea mocheso β ea Karmalloy terata KMW e nyane haholo, - 0.03 × 10-6/ K2,

    'me mocheso oa mocheso oa ho hanyetsa o fetoha hoo e batlang e le mola o otlolohileng ka hare ho bophara
    mocheso oa mocheso.

    Ka hona, mocheso oa mocheso o behiloe ho ba karolelano ea mocheso oa mocheso pakeng tsa
    23 ~ 53 °C, empa 1 × 10-6/K, karolelano ea mocheso pakeng tsa 0 ~ 100 °C, le eona e ka
    ho amoheloa bakeng sa coefficient ea mocheso.

    3) Matla a motlakase khahlano le koporo lipakeng tsa 1 ~ 100 °C le ona a nyane, ka tlase ho + 2 μV/K, le

    e bontša botsitso bo babatsehang nakong ea lilemo tse ngata.

    4) Haeba sena se tla sebelisoa e le thepa ea ho hanyetsa ka mokhoa o nepahetseng, phekolo ea mocheso o tlaase oa mocheso ke
    e hlokehang ho felisa ho khopama ho sebetsa joalo ka ha ho le joalo ka terata ea Manganin CMW.

    Mofuta oa Insulation

    Lebitso la insulation-enamelled Thermal LevelºC(nako ea ho sebetsa 2000h) Lebitso la Khoutu GB Khoutu ANSI. MOFUTA
    Polyurethane enamelled terata 130 UEW QA MW75C
    Polyester enamelled terata 155 MOKHOA QZ MW5C
    Polyester-imide enamelled terata 180 EIW QZY MW30C
    Polyester-imide le polyamide-imide e nang le terata e nang le enamele habeli 200 EIWH(DFWF) QZY/XY MW35C
    Mohala oa enamelled oa Polyamide-imide 220 AIW QXY MW81C







  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona