0.09mm bakeng sa Wirewound Resistors Copper Nickel CuNi44 Alloy Wire
Lik'hemik'hale(%)
| Mn | Ni | Cu |
| 1.0 | 44 | Bal. |
Thepa ea Mechini
| Max Continuous Service Temp | 400 ºC |
| Resistivity ho 20ºC | 0.49 ± 5% ohm*mm2/m |
| Botenya | 8.9g/cm3 |
| Temperature Coefficient of Resistance | <-6 × 10-6/ºC |
| EMF VS Cu (0~100ºC) | -43 μV/ºC |
| Melting Point | 1280 ºC |
| Matla a tšepe | Min 420 Mpa |
| Elongation | Ka tlase ho 25% |
| Sebopeho sa Micrographic | Austenite |
| Thepa ea Magnetic | E seng. |
Boholo bo tloaelehileng:
Re fana ka lihlahisoa ka sebōpeho sa terata, terata e bataletseng, hlobolisa. Re ka boela ra etsa thepa customized ho latela mosebedisi ke likopo.
Mohala o khanyang le o mosoeu–0.03mm~3mm
Oxidized terata: 0.6mm ~ 10mm
terata e bataletseng: botenya 0.05mm ~ 1.0mm, bophara 0.5mm ~ 5.0mm
Lekhalo: 0.05mm ~ 4.0mm, bophara 0.5mm ~ 200mm
Likarolo tsa sehlahisoa:
Khanyetso e ntle ea kutu, e ntle e bonolo ebile e ka solderability. Khanyetso e khethehileng e tlaase e ka sebelisoa masimong a mangata a futhumatsang le a resistor.
Kopo:
E ne e ka sebelisoa ho etsa lisebelisoa tsa motlakase tse futhumatsang motlakase o tlase, joalo ka relay overload overload, low-voltage circuit breaker, joalo-joalo. 'Me e sebelisoa ho futhumatsang mocheso kapa li-tubes tsa condenser ho li-evaporator tsa limela tsa desalination, limela tsa indasteri ea ts'ebetso, libaka tse futhumatsang moea tsa limela tse futhumatsang mocheso, licheso tsa metsi tse nang le khatello e phahameng, le lipeipi tsa metsi a leoatleng ka likepe.
