1.1mm Soft Magnetic Alloy FeNi50 Wire bakeng sa Chokes
1.1mm Alloy e bonolo ea makenete1J50Wire for Chokes
| Lebitso la ntho | 1.1mm Alloy e bonolo ea makenete1J50Wire for Chokes |
| Mokhanni | 1J50 |
| Ntho No | 50W11B |
| Boemo | E khanyang, e bonolo |
| Boemo | 1.1 limilimithara |
| Botenya | 8.25g/cm3 |
| Bolelele | 1052m/kg |
| Boima ba 'mele | hoo e ka bang 20kg / coil |
| Sephutheloana | nyeoe ea lehong |
| Standard | GB/T 15018-1194 |
Bakeng sa 1J50, e lekanang naheng e 'ngoeNi50Alloy 50,E11a, 50H, Hy-Ra49, PB, UNS N14052, ASTM F30,DIN 2.4478,ASTM 753-2 motsoako oa 2
Alloy e qhibiliha ka har'a vacuum medium, e lahleloa ka har'a li-ingots, ka mor'a hore ho be le likheo tse chesang tse entsoeng ka tšepe, 'me ka mor'a hore ho be le mocheso o chesang, ho phunya, ho phekola holim'a metsi, ho phalla ho batang ka lihlahisoa tse felileng.
1J50Iron-nickel alloy (hoo e ka bang 50% nickel le 48% ea tšepe ea tšepe) ke li-alloys tse bonolo tsa makenete tse nang le matla a matla a makenete le induction e phahameng ea matla a khoheli.
1J50 Kopo:
E sebelisoa haholo ho li-transformer tse fapaneng, li-relays, li-clutch tsa motlakase, chokes le likarolo tsa potoloho ea li-cores, lieta tsa pole, li-diaphragm tsa tsebe, li-circuit breaker tsa lefatše, likarolo tse fetisetsoang bakeng sa li-circuit tsa ho lutla ha lefatše, li-valve tsa polokeho ea khase, lithebe tsa makenete tse sebelisoang masimong a mahareng a makenete. , Gyroscope, enjene ea ho hokahanya ka othomathiki, enjene ea ho shebella ea elektroniki.
Motsoako oa lik'hemik'hale%
| C | Mn | Si | P | S | Ni | Cu | Fe |
| ≤0.03 | 0.3-0.6 | 0.15-0.3 | ≤0.02 | ≤0.02 | 49.0-51.0 | ≤0.2 | Bal. |
Thepa ea mochini tlas'a boemo ba annealing(20ºC)
| Tensile Strength(Mpa) | Elongation(%) | Ho thatafala(HV) |
| ≥530 | ≥35 | ≤155 |
Lintho tsa 'mele
| Boima ba 'mele (g/cm3) | 8.25 |
| Sebaka se qhibilihang(ºC) | 1395-1425 |
| Ho hanyetsa motlakase ho 20ºC | 0.45 |
| Saturation magnetostriction coefficient λθ/ 10-6 | 25 |
| Curie ntlha Tc/ ºC | 500 |
| Coefficient of linear katoloso(20ºC~200ºC)X10-6/ºC | ||||||
| Kereiti | 20-100ºC | 20-200ºC | 20-300ºC | 20-400ºC | 20-500ºC | 20-600ºC |
| 1J50 | 8.9 | 9.27 | 9.2 | 9.2 | 9.4 | |
| Thepa ea makenete ea li-alloys tse nang le matla a phahameng a ho kenella masimong a fokolang | |||||||
| 1J50 | Monyetla oa pele | Boholo ba ho kenella | Ho qobella | Saturation magnetic induction intensity | |||
| Сleqhetsoana la khale-khale. Botenya, mm | μ0.08/ (mH/m) | μm/ (mH/m) | Hc/ (A/m) | BS/ T | |||
| ≥ | ≤ | ||||||
| 0.05 mm | 2.5 | 35 | 20 | 1.5 | |||
| 0.1~0.19 limilimithara | 3.8 | 43.8 | 12 | ||||
| 0.2 ~ 0.34 limilimithara | 4.4 | 56.3 | 10.4 | ||||
| 0.35 ~ 1.0 limilimithara | 5.0 | 65 | 8.8 | ||||
| 1.1 ~ 2.5 limilimithara | 3.8 | 44.0 | 12 | ||||
| Sebaka | |||||||
| 8-100 limilimithara | 3.1 | 25.0 | 24 | ||||
Sebopeho le boholo:
| Lekhapetla le Koetsoeng | (0.03~0.10)mm x(180~250)mm >(0.10~1.00)mm x(10~250)mm >(1.00~2.50)mm x(100~250)mm |
| Mohala | Φ0.10~Φ6.00mm |
| Ribone | (4.50~20.0)mm x(50~250)mm |
| Bara/Molamu | Φ20.0~Φ100.0mm |
