Rea u amohela liwebsaeteng tsa rona!

1Cr13al4 Alkro-thal 14 alloy 750 Alferon 902 e Khanyang le Annealed Heating Wire

Tlhaloso e Khutšoanyane:


  • thepa:tšepe, chromium, aluminium
  • Litaba tsa Carbon:khabone e tlase
  • Mocheso o phahameng ka ho fetisisa:1250ºC
  • ntlha ea ho qhibiliha:1500ºC
  • tekano:7.1G/M³
  • Lintlha tsa Sehlahisoa

    LBH

    Li-tag tsa Sehlahisoa

    1Cr13al4 Alkro-thal 14 motsoako oa 750Alferon 902, Mohala oa ho futhumatsa o Khanyang 'me o Annealed
    1Cr13Al4ke motsoako oa tšepe-chromium-aluminium (FeCrAl alloy) bakeng sa tšebeliso ea mocheso ho fihlela ho 750°C (1382°F). Alloy e nang le litšobotsi tse phahameng tsa resistivity, mocheso o tlaase oa mocheso oa ho hanyetsa motlakase, mocheso o phahameng oa ts'ebetso, khanyetso e ntle ea oxidation tlas'a mocheso o phahameng.
    FeCrAl, lelapa la li-alloys tsa tšepe-chromium-aluminium tse sebelisoang mefuteng e mengata ea ho hanyetsa le lisebelisoa tse phahameng tsa mocheso le tsona li sebelisoa ka mokhoa oa lithapo tsa ho hanyetsa.
    FeCrAl resistance electrothermal alloy e na le resistivity e phahameng, e ntle holim'a oxidation resistance, le matla a phahameng mochesong o phahameng, ts'ebetso e ntle ea ts'ebetso le weldability, e ka sebelisoa haholo ka khauta, lisebelisoa tsa ntlo, indasteri ea ho etsa mechine e le lisebelisoa tsa ho futhumatsa le indasteri ea motlakase e le lisebelisoa tsa ho hanyetsa.
    E sebelisoa haholo seboping sa motlakase sa liindasteri, lisebelisoa tsa motlakase tsa lapeng le sesebelisoa sa mahlaseli a hole a infrared. Joalo ka li-heaters tsa pane, li-heaters tsa infrared, lipoleiti tse futhumatsang, ka har'a lihitara tsa cartridge, lihitara tsa polokelo, lihitara tsa ceramic bakeng sa lipoleiti tsa ho pheha, li-kilns elements, li-radiator, ka li-heaters tsa quartz bakeng sa ho futhumatsa sebaka, li-toaster, li-oveni tsa toaster, li-dryer tsa infrared tsa indasteri, li-coil holim'a ceramic e bōpiloeng. fiber bakeng sa ho pheha lipoleiti tse nang le li-hobs tsa ceramic joalo-joalo.

     

    Litaba tsa Lik'hemik'hale, %

    C P S Mn Si Cr Ni Al Fe Tse ding
    Max
    0.12 0.025 0.020 0.50 ≤0.7 12.0 ~ 15.0 ≤0.60 4.0~6.0 Ho leka-lekanya -

    Thepa ea Mechini

    Thempereichara e Tsoelang Pele ea Tšebeletso:
    Resisivity 20ºC:
    Tekano:
    Thermal Conductivity:
    Coefficient ea Katoloso ea Thermal:
    Melting Point:
    Elongation:
    Sebopeho sa Micrographic:
    Thepa ea Magnetic:
    950ºC
    1.25ohm mm2/m
    7.40g/cm3
    52.7 KJ/m·h·ºC
    15.4×10-6/ºC (20ºC~1000ºC)
    1450ºC
    Ka tlase ho 16%
    Ferrite
    makenete

    Thempereichara Factor of Motlakase Resistivity

    20ºC 100ºC 200ºC 300ºC 400ºC 500ºC 600ºC
    1.000 1.005 1.014 1.028 1.044 1.064 1.090
    700ºC 800ºC 900ºC 1000ºC 1100ºC 1200ºC 1300ºC
    1.120 1.132 1.142 1.150 - - -

    Sebopeho:
    Ka bophelo ba nako e telele ea tšebeletso.Ho futhumatsa ka potlako.Ho sebetsa hantle ha mocheso.Mocheso o tšoanang. E ka sebelisoa ka holimo. Ha e sebelisoa ka motlakase o lekantsoeng, ha ho na taba e sa tsitsang. Ke ts'ireletso ea tikoloho terata ea motlakase e futhumatsang. Le mokhoa o mong oa terata e theko e boima ea nichrome. E ka etsoa ho latela litlhoko tsa bareki.

    Tšebeliso:
    E sebelisoa haholo seboping sa indasteri, lisebelisoa tsa motlakase tsa ntlo, heater ea infrared, jj.
    Thepa ea bohlokoa:
    1.Botenya ba ho hanyetsa ka holim'a metsi ho hanyetsa lera la oxidation: 5-15 μ m.
    2. Insulation resistance: ho lemoha multimeter infinity.
    3.The voltage-endurance ea insulating single layer e kholo ho feta alternating voltage 60 ν ntle le ho senyeha.
    4. Tšebeliso ea motlakase: 6-380 ν.
    5. Ho sebelisa mocheso: Maximum1200 ºC
    6. Bophelo ba tšebeletso: eseng ka tlase ho lihora tse 6000.
    7.Thermal shock performance: Motlakase oa mocheso oa motlakase o ka mamella mocheso o batang le o chesang ka makhetlo a 600-6000 ntle le deformation.

    6 81111

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona