Terata e Tetehileng ea CuMn12Ni Precision Manganin Alloy 1.5mm bakeng sa Lisebelisoa le Limithara

Tlhaloso e Khutšoanyane:

Sehlopha sa motsoako:CuMn12Ni

Bophara:1.5mm (± 0.01mm, e ka fetoloang ho tloha ho 0.8–5.0mm)

Ho hanyetsa (20℃):0.42 μΩ·m

TCR (0–100℃):±10×10⁻⁶/℃

Matla a tšepe:≥500 MPa (e thata); ≥320 MPa (e bonolo)

Ho lelefatsa:≥22% (bohale bo bonolo)

Boima (HV):140–180 (e thata); 90–110 (e bonolo)

Botenya:8.85 g/cm³

Romella imeile ho rona

Qaqiso ea Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

CuMn12Ni Manganin Wire (1.5mm Diameter)

Kakaretso ea Sehlahisoa

Terata ea manganin ea CuMn12Ni (bophara ba 1.5mm) e tsoang ho Tankii Alloy Material ke terata ea alloy ea koporo-manganese-nickel e tsitsitseng haholo e nang le qetello e khanyang, e ts'oanang joalo ka ha ho bontšitsoe. E entsoe ka Cu (tekanyo) + 11.0–13.0% Mn + 1.5–2.5% Ni e nang le likarolo tse tsitsitseng tsa trace, e hlahisoa ka ho qhibilihisa vacuum, ho phutholla ho chesang, ho hula ka makhetlo a mangata, le ho annealing ka nepo. E na le coefficient ea mocheso o tlase haholo (TCR), resistivity e tsitsitseng, le matla a matle a mechini, e leng se etsang hore e be e loketseng li-resistor tse nepahetseng tse matla a phahameng, li-shunt tsa hona joale, le likarolo tsa taolo ea indasteri tse hlokang botsitso ba nako e telele le bokhoni bo phahameng ba ho jara hona joale.

Mekhoa e Tloaelehileng le Motheo oa Lintho tsa Bohlokoa

Sehlopha sa motsoako: CuMn12Ni
Litekanyo tsa Machaba:
- UNS: C18600
- DIN: 2.0880
- JIS: C1860
- GB/T: 3131-2019 (Mn12Ni)
Tlhaloso ea Senotlolo: Bophara ba 1.5mm (mamello: ± 0.01mm); bonolo/halofo e thata/e thata e fumaneha
Sebopeho sa Lik'hemik'hale (boima%): Mn: 11.0–13.0%; Ni: 1.5–2.5%; Cu: ho leka-lekana; Fe ≤0.3%; Pb ≤0.05%; C ≤0.1%
Maemo a Latelang: ASTM B124, EN 13602, GB/T 3131-2019, RoHS 2.0
Moetsi: Tankii Alloy Material, e netefalitsoeng ho ISO 9001 le ISO 14001

Melemo ea Bohlokoa ba Motheo (E thehiloe holim'a terata e teteaneng ea 1.5mm)

1. Tshebetso ea Motlakase e Tsitsitseng ka ho Fetisisa

TCR e Tlase le Ho Tsitsisa: Ho Tsitsisa = 0.42 μΩ·m (20℃), TCR = ±10×10⁻⁶/℃ (0–100℃), ho netefatsa ho sisinyeha ha khanyetso ≤0.01%/℃—e leng sa bohlokoa bakeng sa li-resistor le li-shunt tse nang le matla a phahameng a nepahetseng.
Bokgoni bo Phahameng ba ho Jara Motlakase: Bophara ba 1.5mm bo fana ka bokgoni bo botle ba ho jara motlakase (≥20A e tswelang pele), bo loketse ditshebediso tse matla tsa indasteri le tsa dikoloi.

2. Thepa e Hloahloa ea Mekaniki le Tsamaiso

Matla a Phahameng le Bokgoni: Matla a ho tsikinyeha ≥500 MPa (bohale bo thata) / ≥320 MPa (bohale bo bonolo), ho lelefatsa ≥22% (bohale bo bonolo), ho tshehetsa ho kobeha, ho kobeha le ho sisinyeha ntle le ho robeha.
Bokaholimo bo Khanyang le Bokgoni bo Botle ba ho Kopana: Qetello e khanyang e bentšitsoeng (Ra ≤0.8μm) e netefatsa khanyetso e tlase ea ho kopana le ho kopanya ka mokhoa o tšepahalang, e loketseng bakeng sa ho phetholla ha resistor le likhokahano tsa terminal.

3. Ho senyehe hantle le ho hanela tikoloho

Ho Hanela Tshenyo e Sepakapakeng le e Bobebe: E etsa filimi e teteaneng ya oxide, e feta teko ya ho fafatsa letsoai ya ASTM B117 ya dihora tse 500 ntle le tshenyo e totobetseng.
Mocheso o Sephara oa Ts'ebetso: -40℃ ho isa ho 150℃, ts'ebetso e tsitsitseng libakeng tsa indasteri le tsa likoloi.

Litlhaloso tsa Tekheniki

Tšobotsi	Boleng (Bo Tloaelehileng)
Kereiti ea motsoako	CuMn12Ni (bonolo/halofo e thata/bohale bo thata)
Bophara	1.5mm (± 0.01mm, e ka fetoloang ho tloha ho 0.8–5.0mm)
Ho hanyetsa (20℃)	0.42 μΩ·m
TCR (0–100℃)	±10×10⁻⁶/℃
Matla a tšepe	≥500 MPa (e thata); ≥320 MPa (e bonolo)
Ho lelefatsa	≥22% (bohale bo bonolo)
Boima (HV)	140–180 (e thata); 90–110 (e bonolo)
Botenya	8.85 g/cm³
Qetello ea Bokaholimo	E bentšitsoeng ka khanya (Ra ≤0.8μm)
Mocheso o sebetsang	-40℃ ho isa ho 150℃

Litlhaloso tsa Sehlahisoa

Ntho	Tlhaloso
Foromo ea Phepelo	Likhoele (5kg/10kg/25kg ka khoele)
Bohale	E bonolo (e koahetsoeng), E thata ka halofo, E thata (ha e huloa)
Phekolo ea Bokaholimo	E bentšitsoeng ka mokhoa o khanyang, e qhibilihisitsoeng, kapa e kenngoeng ka makotikoting (ha ho hlokahale)
Ho sebetsa habonolo	Ho kobeha, ho kobeha, ho tjheseletsa, ho tjheseletsa
Sephutheloana	Polasetiki + filimi ea PE + lebokose (thibela-oksidation le tšenyo)
Ho iketsetsa	Bophara (0.8–5.0mm); bolelele; bohale; kalafo ea bokaholimo

Maemo a Tloaelehileng a Kopo

Li-Resistors tse Matla a Phahameng ka ho Nepahala: Li-resistors tsa motlakase oa terata, li-resistors tsa mojaro bakeng sa li-inverter tsa indasteri le lisebelisoa tsa motlakase.
Li-shunt tsa Hona Joale: Li-shunt tsa hona joale tse nang le matla a phahameng bakeng sa litsamaiso tsa taolo ea betri (BMS), limithara tsa motlakase, le litsamaiso tsa ho tjhaja likoloi.
Taolo ea Liindasteri: Likarolo tsa ho hanyetsa ka nepo bakeng sa li-PLC, li-module tsa ho lokisa matšoao, le lipotoloho tsa puseletso ea mocheso.
Likoloi le Sefofane: Li-resistor tse tsitsitseng haholo bakeng sa lisebelisoa tsa elektroniki tsa likoloi le lisebelisoa tsa lifofane.

E fetileng: Terata e chitja ea Nicr80/20 e ntle haholo ea Nichrome 0.020mm bakeng sa li-resistor

E 'ngoe: Terata ea Nichrome ea 0.045mm Nicr8020 Terata ea ho Futhumatsa Bakeng sa Resistor e Sebelisang Lisebelisoa tsa ho Lekanya ka Nepo

Ngola molaetsa oa hau mona 'me u o romelle ho rona