Cuni10 Copper Nickel Alloy Wire/Sheet/Strip (C70600/Cuprothal 15)
Boitsebiso: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi20, CuNi23, CuNi25, CuNi30, CuNi34, CuNi44.
Mohala / Molamu / Bar bophara: 0.02mm-30mm
Tsela: Botenya0.01 ~ 6.0 bophara: 610Max
CuNi10, e tsejoang hape e le Cuprothal 15, ke motsoako oa koporo-nickel (CuNi alloy) e nang le matla a mahareng a ho hanyetsa mocheso bakeng sa ho hanyetsa mocheso o tlase. Alloy e loketse ho sebelisoa ha mocheso o fihla ho 400 ° C (750 ° F).
CuNi10 hangata e sebelisoa bakeng sa ho futhumatsa likhoele, fuse, resistors le mefuta e fapaneng ea balaoli.
Litaba tsa Lik'hemik'hale, %
Ni | Mn | Fe | Si | Cu | Tse ding | Tataiso ea ROHS | |||
Cd | Pb | Hg | Cr | ||||||
10 | 0.3 | - | - | Bal | - | ND | ND | ND | ND |
Boitsebiso:CuNi10(C70600) CuNi30(C71500) ho tloha ho lakane/plate/strip
CuNi10Fe1/C70600 Strip/sheet
Li-nickel tsa Koporo (Nickel ea Koporo), Nickel ea Koporo, (90-10). Ho hanyetsa kutu e ntle haholo, haholo libakeng tsa leoatle. Matla a phahameng a leka-lekaneng, khanyetso e ntle ea ho lla ha mocheso o phahameng. Thepa ka kakaretso e eketseha ka litaba tsa nickel. E batla e phahame ka theko ha e bapisoa le aluminium ea koporo le lisebelisoa tse ling tse nang le thepa e tšoanang ea mochini
Sebopeho | Ho hanyetsa ( 200C μ Ω . m) | Max. Mocheso o sebetsang (0C) | Tensile Strength (Mpa) | Sebaka se qhibilihang (0C) | Boima ba 'mele (g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μ V/ 0C) (0~100 0C) |
Alloy Nomenclature | |||||||
NC035(CuNi30) | 0.35± 5% | 300 | 350 | 1150 | 8.9 | <16 | -34 |
Thepa ea Mechini | Metric | Maikutlo |
Matla a Tensile, a ho qetela | 372 - 517 MPa | |
Matla a Tensile, Kotulo | 88.0 - 483 MPa | Ho itšetlehile ka bohale |
Elongation at Break | 45.0 % | ka 381 limilimithara. |
Modulus ea Elasticity | 150 GPA | |
Poissons karo-karolelano | 0.320 | E baletsweng |
Charpy Impact | 107 J | |
Boikemisetso | 20% | UNS C36000 (koporo e sehang mahala) = 100% |
Shear Modulus | 57.0 GPA |