CuNi23(alloy 180) Copper Nickel Alloy Wire/Flat Wire/Strip/foil Midohm
Tlhaloso ea Sehlahisoa
CuNi23Mn low resistance alloy e sebelisoa haholo ka har'a sekhechana sa motlakase se tlase, relay overload overload, le lihlahisoa tse ling tsa motlakase o tlase. Ke e 'ngoe ea lisebelisoa tsa bohlokoa tsa lihlahisoa tsa motlakase tse tlase. Lisebelisoa tse hlahisoang ke k'hamphani ea rona li na le litšobotsi tse ntle tsa ho hanyetsa le botsitso bo phahameng. Re ka fana ka mefuta eohle ea terata e chitja, thepa e bataletseng le ea lakane.
Litaba tsa Lik'hemik'hale, %
Ni | Mn | Fe | Si | Cu | Tse ding | Tataiso ea ROHS | |||
Cd | Pb | Hg | Cr | ||||||
23 | 0.5 | - | - | Bal | - | ND | ND | ND | ND |
Thepa ea Mechini
Max Continuous Service Temp | 250ºC |
Resisivity ho 20ºC | 0.35%ohm mm2/m |
Botenya | 8.9g/cm3 |
Thermal Conductivity | 16(Boholo) |
Melting Point | 115ºC |
Matla a Tensile,N/mm2 Annealed,Soft | 270 ~ 420 Mpa |
Matla a Tsitsitseng,N/mm2 Cold Rolled | 350 ~ 840 Mpa |
Elongation(anneal) | 25% (Boholo) |
Elongation (ho bata ho phuthoa) | 2% (Boholo) |
EMF vs Cu, μV/ºC (0~100ºC) | -25 |
Sebopeho sa Micrographic | austenite |
Thepa ea Magnetic | E seng |