CuNi44 NC050 Foil Alloy ea Nickel-Copper e nang le Ts'ebetso e Phahameng bakeng sa Tšebeliso ea Motlakase le Liindasteri Setšoantšo se Hlahisitsoeng

Motsoako o Phahameng oa Nickel-Copper oa CuNi44 NC050 Foil bakeng sa Tšebeliso ea Motlakase le Liindasteri

Tlhaloso e Khutšoanyane:

Botenya ba mefuta:0.005mm - 0.1mm (e etselitsoeng ho fihlela ho 0.5mm)

Bophara ba Bophara:10mm - 600mm

Mamello ea Botenya:± 0.0005mm (bakeng sa ≤0.01mm); ± 0.001mm (bakeng sa >0.01mm)

Mamello ea Bophara:± 0.1mm

Matla a tšepe:450 - 550 MPa (boemo bo annealed)

Ho lelefatsa:≥25% (boemo bo annealed)

Boima (HV):120 - 160 (e annealed); 200 - 250 (e thata halofo)

Bokgoni ba Bokaholimo (Ra):≤0.1μm (qetello e bentšitsoeng)

Romella imeile ho rona

Qaqiso ea Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Foil ea CuNi44

Kakaretso ea Sehlahisoa

Foile ea CuNi44ke foil ea koporo le nickel e sebetsang hantle e nang le nickel e tloaelehileng ea 44%, e fanang ka botsitso bo ikhethang ba ho hanyetsa motlakase, ho hanyetsa ho bola, le ho ba bonolo ho bopa. Foil ena e entsoeng ka nepo e hlahisoa ka lits'ebetso tse tsoetseng pele tsa ho phutholoha ho fihlela mamello e tiileng, e leng se etsang hore e be e loketseng lits'ebetso tse hlokang thepa ea motlakase e tsitsitseng le ts'ebetso ea thepa ea tekanyo e tšesaane—joalo ka li-resistor tse nepahetseng, li-gauge tsa khatello, le likarolo tsa thermocouple.

Litlhophiso tse Tloaelehileng

Sehlopha sa Alloy: CuNi44 (Koporo-Nikele 44)
Nomoro ea UNS: C71500
Tekanyetso ea DIN: DIN 17664
Tekanyetso ea ASTM: ASTM B122

Likarolo tsa Bohlokoa

Khanyetso e Tsitsitseng ea Motlakase: Coefficient e tlase ea khanyetso ea mocheso (TCR) ea ±40 ppm/°C (e tloaelehileng) ho feta -50°C ho isa ho 150°C, e netefatsang ho sisinyeha ho fokolang ha khanyetso libakeng tse feto-fetohang ha mocheso.
Ho hanyetsa ho hoholo: 49 ± 2 μΩ·cm ho 20°C, e loketse likarolo tsa ho hanyetsa tse nepahetseng haholo.
Sebopeho se setle haholo: Ho ductility e phahameng ho dumella ho phutholoha ho batang ho isa ho di-gauge tse tshesane haholo (ho fihlela ho 0.005mm) le ho hatakela ka mokhoa o rarahaneng ntle le ho petsoha.
Ho Hanela Tshenyo: E hanela tshenyo ya sepakapaka, metsi a hlwekileng le dibaka tse bobebe tsa dikhemikhale (e latela teko ya ho fafatsa letswai ya ISO 9227 ka dihora tse 500 ka oxidation e fokolang).
Ho Tsitsisa Thempereichara: E boloka thepa ea mechini le ea motlakase ho fihlela ho 300°C (tšebeliso e tsoelang pele).

Litlhaloso tsa Tekheniki

Tšobotsi	Boleng
Botenya ba mefuta e fapaneng	0.005mm – 0.1mm (e etselitsoeng ho fihlela ho 0.5mm)
Bophara ba Bophara	10mm – 600mm
Mamello ea Botenya	± 0.0005mm (bakeng sa ≤0.01mm); ± 0.001mm (bakeng sa >0.01mm)
Mamello ea Bophara	± 0.1mm
Matla a tšepe	450 – 550 MPa (boemo bo annealed)
Ho lelefatsa	≥25% (boemo bo annealed)
Boima (HV)	120 – 160 (e annealed); 200 – 250 (e thata halofo)
Bokgoni ba Bokaholimo (Ra)	≤0.1μm (qetello e bentšitsoeng)

Sebopeho sa Lik'hemik'hale (Tloaelehileng, %)

Karolo	Dikahare (%)
Nikele (Ni)	43.0 – 45.0
Koporo (Cu)	Tekanyo (55.0 - 57.0)
Tšepe (Fe)	≤0.5
Manganese (Mn)	≤1.0
Silicone (Si)	≤0.1
Khabone (C)	≤0.05
Litšila tse Felletseng	≤0.7

Litlhaloso tsa Sehlahisoa

Ntho	Tlhaloso
Qetello ea Bokaholimo	E koahetsoeng (e khanyang), e bentšitsoeng, kapa e sa hlakang
Foromo ea Phepelo	Meqolo (bolelele: 50m - 500m) kapa maqephe a sehiloeng (boholo bo ikhethileng)
Sephutheloana	E koetsoe ka vacuum ka mekotleng e sa keneleng mongobo ka pampiri e thibelang ho kenoa ha oksijene; dikotlolo tsa lehong bakeng sa meqolo
Dikgetho tsa ho Sebetsa	Ho seha, ho seha, ho kenya pente, kapa ho koahela (mohlala, mealo ea ho kenya mocheso bakeng sa ts'ebeliso ea motlakase)
Setifikeiti sa Boleng	Ho latela RoHS, REACH; litlaleho tsa liteko tsa thepa (MTR) lia fumaneha

Likopo tse Tloaelehileng

Likarolo tsa Motlakase: Li-resistor tse nepahetseng, li-shunt tsa hona joale, le likarolo tsa potentiometer.
Li-sensor: Li-gauge tsa khatello, li-sensor tsa mocheso, le li-transducer tsa khatello.
Li-thermocouple: Lithapo tsa puseletso bakeng sa li-thermocouple tsa Mofuta oa T.
Tšireletso: Tšireletso ea EMI/RFI lisebelisoa tsa elektroniki tse nang le maqhubu a phahameng.
Lisebelisoa tsa ho Futhumatsa: Lifoile tsa ho futhumatsa tse nang le matla a tlase bakeng sa lisebelisoa tsa bongaka le tsa lifofane.

Re fana ka lits'ebeletso tsa ts'ebetso e ikhethileng tse etselitsoeng litlhoko tse itseng tsa ts'ebeliso. Lisetifikeiti tsa mahala (100mm × 100mm) le tse qaqileng tsa thepa lia fumaneha ha li kopuoa.

E fetileng: Terata ea Thermocouple ea Mofuta oa B bakeng sa Litikoloho tse Chesang ka ho Fetisisa Temo ea Thermal e Nepahetseng

E 'ngoe: Terata e bataletseng ea CuNi44 (ASTM C71500/DIN CuNi44) Motsoako oa Nickel-Copper bakeng sa Likarolo tsa Motlakase

Ngola molaetsa oa hau mona 'me u o romelle ho rona