Enameled Manganin Wire/Low Resistance Alloy Wire
Tlhaloso ea Sehlahisoa
Manganin ke motsoako oa 86% oa koporo, 12% ea manganese, le 2% nickel.
Mehala ena ea ho hanyetsa enameled e 'nile ea sebelisoa ka bophara bakeng sa li-resistors tse tloaelehileng, koloi
likarolo, li-resistors tsa matsoelintsoeke, joalo-joalo ho sebelisa ts'ebetso ea ho kenya letsoho e loketseng lits'ebetso tsena, ho nka monyetla ka botlalo ba likarolo tse ikhethang tsa ho roala enamel.
Ho feta moo, re tla etsa insuela ea enamel ea terata ea tšepe ea bohlokoa joalo ka terata ea silevera le platinamo ka taelo. Ka kopo, sebelisa tlhahiso ena ka odara.
Mofuta oabare Alloy wire
The alloy re ka etsa enamelled ke Copper-nickel alloy terata, Constantan terata, Manganin terata. Kama Wire,NiCr Alloy terata,FeCrAl Alloy terata joalo-joalo
Boholo:
terata e chitja: 0.018mm ~ 3.0mm
Mmala oa ho kenngoa ha enamel: Bofubelu, Botala, Bosehla, Botsho, Boputsoa, Tlhaho joalo-joalo.
Boholo ba Ribone: 0.01mm * 0.2mm ~ 1.2mm * 24mm
Moq: 5kg boholo bo bong le bo bong
Mofuta oa insulation
Lebitso la insulation-enamelled | Thermal LevelºC (nako ea ho sebetsa 2000h) | Lebitso la Khoutu | GB Khoutu | ANSI. MOFUTA |
terata enamelled ea polyurethane | 130 | UEW | QA | MW75C |
Polyester enamelled terata | 155 | MOKHOA | QZ | MW5C |
Polyester-imide enamelled terata | 180 | EIW | QZY | MW30C |
Polyester-imide le polyamide-imide e nang le terata e nang le enamele habeli | 200 | EIWH (DFWF) | QZY/XY | MW35C |
Mohala oa enamelled oa Polyamide-imide | 220 | AIW | QXY | MW81C |
Ni | Mn | Fe | Si | Cu | Tse ding | Tataiso ea ROHS | |||
Cd | Pb | Hg | Cr | ||||||
2~3 | 11-13 | 0.5(boholo) | micro | Bal | - | ND | ND | ND | ND |
Thepa ea Mechini
Max Continuous Service Temp | 0-45ºC |
Resisivity ho 20ºC | 0.47±0.03ohm mm2/m |
Botenya | 8.44 g/cm3 |
Thermal Conductivity | -3~+20KJ/mh·ºC |
Thempereithara ea ho hanyetsa ho 20 ºC | -2~+2α×10-6/ºC(Class0) |
-3~+5α×10-6/ºC(Sehlopha sa1) | |
-5~+10×10-6/ºC(Sehlopha sa2) | |
Melting Point | 1450ºC |
Tensile Strength(Hathata) | 635 Mpa(mets) |
Matla a Tensile,N/mm2 Annealed,Soft | 340~535 |
Elongation | 15%(metsotso) |
EMF vs Cu, μV/ºC (0~100ºC) | 1 |
Sebopeho sa Micrographic | austenite |
Thepa ea Magnetic | eseng |
Sebopeho sa Micrographic | Ferrite |
Thepa ea Magnetic | Magnetic |
Tšebeliso ea Manganin
Manganin foil le terata li sebelisoa ha ho etsoa resistor, Haholo-holo ammeter shunt, ka lebaka la mocheso oa eona o batlang o lekana le zero oa boleng ba ho hanyetsa le botsitso ba nako e telele.