ERNiCrMo-3 Welding Wire (Inconel 625 / UNS N06625 / ERNiCrMo3 / Nickel Alloy 625 Filler) - Metal Alloy Filler e Thibelang ho Corrosion bakeng sa Tikoloho e Feteletseng.
Tlhaloso ea Sehlahisoa
ERNiCrMo-3 ke terata e tiileng ea nickel-chromium-molybdenum alloy welding e sebelisetsoang ho tjheseletsa Inconel® 625 le li-alloys tse tšoanang le tse sa cheseheng mocheso. Filler ena e fana ka khanyetso e ikhethang ho likoti, kutu ea mapheo, tlhaselo ea li-intergranular, le ho phatloha ho hoholo ha khatello ea maikutlo libakeng tse fapaneng tse senyang haholo, ho kenyeletsoa metsi a leoatle, li-acids le moea o oxidizing/fokotsa.
E sebelisoa haholo bakeng sa ho koahela le ho kopanya lits'ebetso liindastering tse kang ts'ebetso ea lik'hemik'hale, tsa metsing, tsa tlhahiso ea matla le sefofane. ERNiCrMo-3 e loketse mekhoa ea TIG (GTAW) le MIG (GMAW).
Likarolo tsa Bohlokoa
-
Ho hanyetsa ka mokhoa o ikhethang metsing a leoatle, li-acids (H₂SO₄, HCl, HNO₃), le boemo bo phahameng ba mocheso o phahameng oa oxidizing/ho fokotsa maemo a leholimo.
-
E ntle ka ho fetesisa le ho hanyetsa ho bola ha mapheo libakeng tse nang le chloride e ngata
-
Ho cheseha ho ikhethang ka arc e boreleli, spatter e nyane, le ponahalo e hloekileng ea lifaha
-
E boloka matla a mochini ho fihla ho 980°C (1800°F)
-
E hanyetsana haholo le ho phatloha ha kutu le ho hola ha intergranular
-
E loketse litšepe tse sa tšoaneng, li-overlays le li-hardfacing
-
E lumellana le AWS A5.14 ERNiCrMo-3 le UNS N06625
Mabitso a Tloaelehileng / Mabitso
-
AWS: ERNiCrMo-3
-
UNS: N06625
-
E lekanang le eona: Inconel® 625
-
Mabitso a Mang: Nickel Alloy 625 filler tšepe, Alloy 625 TIG terata, 2.4831 terata ea welding
Lisebelisoa tse Tloaelehileng
-
Likarolo tsa leoatle le meaho ea kantle ho naha
-
Lijana tsa mocheso, likepe tse sebetsanang le lik'hemik'hale
-
Mehaho ea nyutlelie le ea sepakapaka
-
Lisebelisoa tsa sebōpi le li-flue gas scrubbers
-
Ho roala holim'a carbon kapa tšepe e sa hloekang bakeng sa ho hanyetsa kutu
-
Ho tjheseletsa ho sa tshwaneng pakeng tsa tshepe e sa hlwekang le alloys ya nickel
Sebopeho sa Lik'hemik'hale (% Se Tloaelehileng)
| Element | Litaba (%) |
|---|---|
| Nickel (Ni) | ≥ 58.0 |
| Chromium (Cr) | 20.0 - 23.0 |
| Molybdenum (Mo) | 8.0 - 10.0 |
| Tshipi (Fe) | ≤ 5.0 |
| Niobium (Nb) + Ta | 3.15 - 4.15 |
| Manganese (Mn) | ≤ 0.50 |
| Khabone (C) | ≤ 0.10 |
| Silicon (Si) | ≤ 0.50 |
| Aluminium (Al) | ≤ 0.40 |
| Titanium (Ti) | ≤ 0.40 |
Mechanical Properties (Ts'oanelo joalo ka-Welded)
| Thepa | Boleng |
|---|---|
| Matla a tšepe | ≥ 760 MPa |
| Kotulo Matla | ≥ 400 MPa |
| Elongation | ≥ 30% |
| Mocheso oa Tšebeletso | Ho fihlela ho 980°C |
| Khanyetso ea Corrosion | E kgabane |
Litlhaloso Tse Fumanehang
| Ntho | Lintlha |
|---|---|
| Diameter Range | 1.0 mm – 4.0 mm (Tlhaselo: 1.2 / 2.4 / 3.2 mm) |
| Mokhoa oa ho Welding | TIG (GTAW), MIG (GMAW) |
| Sephutheloana | 5kg / 15kg spools kapa lithupa tse sehiloeng tsa TIG (bolelele bo tloaelehileng bo fumaneha) |
| Boemo ba Bokaholimo | Leqeba le khanyang, le se nang mafome, le nang le leqeba le nepahetseng |
| Litšebeletso tsa OEM | Leibole ea poraefete, barcode, lebokose le ikhethileng / tšehetso ea ho paka |
Li-alloys tse amanang
-
ERNiCrMo-4 (Inconel 686)
-
ERNiCrMo-10 (C22)
-
ERNiFeCr-2 (Inconel 718)
-
ERNiCr-3 (Inconel 82)
-
ERNiCrCoMo-1 (Inconel 617)
