Ts'ebetso e Ntle ea CuniI23 Heating Alloy Wire e nang le Tharollo e Sebetsang le e Tsitsitseng
Cuni 23 Heating Alloy Wire e nang le Tharollo e Sebetsang le e Tsitsitseng
Mabitso a tloaelehileng:CuNi23Mn, NC030, 2.0881
Mohala oa koporo oa nickel alloyke mofuta oa terata e entsoeng ka motsoako oa koporo le nickel.
Mofuta ona oa terata o tsebahala ka ho hanyetsa ho bola le matla a ho mamella mocheso o phahameng.
Hangata e sebelisoa lits'ebetsong moo thepa ena e leng ea bohlokoa, joalo ka tikolohong ea maoatle, likhoele tsa motlakase le lisebelisoa tsa ho futhumatsa. Thepa e ikhethileng ea terata ea koporo ea nickel alloy e ka fapana ho latela sebopeho se nepahetseng sa alloy, empa ka kakaretso e nkuoa e le lisebelisoa tse tšoarellang le tse tšepahalang bakeng sa lits'ebetso tse fapaneng.
1. Mohala oa Copper Nickel o bonolo ho tjheseletsa mme o bonolo ho etsoa, kahoo o ka etsoa ka mefuta e mengata mme o sebelisoa haholo libakeng tsohle.
2. Li-alloys tsa Copper Nickel (CuNi) ke lisebelisoa tsa ho hanyetsa tse mahareng ho isa ho tse tlase tse sebelisoang lits'ebetsong tse nang le mocheso o phahameng oa ho sebetsa ho fihlela ho 400 ° C (750 ° F).
3. Li-alloys tsa nickel tsa koporo li na le coefficient e tlaase ea ho atolosoa ha mocheso, ho ba lumella ho mamella lipotoloho tsa mocheso ntle le liphetoho tse kholo tsa dimensional.
4. Li-alloys tsa nickel tsa koporo li bontša khanyetso e ntle ea ho senya, haholo-holo libakeng tsa leoatle. Sena se etsa hore e be tse loketseng ho sebelisoa libakeng tsa metsi a letsoai.
5. Ka conductivity e phahameng ea motlakase, matla a matle a mochine, a lumellang likopo tse hlokang.
6. Lisebelisoa tsa mechine li ka etsoa ka boinotšing, ho etsa bonnete ba hore kopo e tsitsitseng le e ka tšeptjoang maemong a fapaneng.
Litaba tsa Lik'hemik'hale, %
| Ni | Mn | Fe | Si | Cu | Tse ding | Tataiso ea ROHS | |||
| Cd | Pb | Hg | Cr | ||||||
| 23 | 0.5 | - | - | Bal | - | ND | ND | ND | ND |
Thepa ea Mechini ea CuNi23 (2.0881)
| Max Continuous Service Temp | 300ºC |
| Resisivity ho 20ºC | 0.3±10%ohm mm2/m |
| Botenya | 8.9g/cm3 |
| Thermal Conductivity | <16 |
| Melting Point | 1150ºC |
| Matla a Tensile,N/mm2 Annealed,Soft | >350 Mpa |
| Elongation(anneal) | 25%(metsotso) |
| EMF vs Cu, μV/ºC (0~100ºC) | -34 |
| Thepa ea Magnetic | E seng |