Manganin Enameled Wire 0.1mm, 0.2mm, 0.5mm High-Precision Resistance Alloy Wire

Tlhaloso e Khutšoanyane:

Litšobotsi tsa bohlokoa
Litšobotsi tse ikhethileng indastering
Boitsebiso ba Mokhanni
Motsoako oa Copper Nickel
Insulation Material
PE
Palo ea Bakhanni

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Mohala oa Manganin Enameled (0.1mm, 0.2mm, 0.5mm) High-Precision Resistance Alloy Wire

Kakaretso ea Sehlahisoa

Manganineterata enameledke terata ea motsoako e phahameng e hanyetsanang le mocheso e entsoeng ka motsoako oa manganin (Cu-Mn-Ni alloy) e koahetsoeng ka lera le tšesaane le thibelang mocheso la enamel. E fumaneha ka bophara ba 0.1mm, 0.2mm, le 0.5mm, e etselitsoe lits'ebetso tse hlokang khanyetso e tsitsitseng ea motlakase holim'a mefuta e mengata ea mocheso le ho hoholeha ho fokolang. Ho roala ha enamel ho fana ka ts'ireletso e ntle ea motlakase le ts'ireletso ea mochini, ho etsa hore e tšoanelehe bakeng sa lihanyetsi tse nepahetseng, li-shunts tsa hajoale le lisebelisoa moo ho nepahala ho leng bohlokoa.

Likhetho tse Tloaelehileng

Alloy Standard: E lumellana le ASTM B193 (litlhaloso tsa alloy ea manganin)
Enamel Insulation: E kopanaIEC 60317-30 (polyimide enamel bakeng sa lithapo tsa mocheso o phahameng)
Dimensional Standards: E dumellana le GB/T 6108 (mamello a saese ya terata e entsweng ka enameled)

Likarolo tsa Bohlokoa

Ultra-Stable Resistance: Temperature coefficient of resistance (TCR) ≤20 ppm/°C (-55°C ho 125°C)
Low Resistivity Drift: <0.01% phetoho ea ho hanyetsa ka mor'a lihora tse 1000 ho 100 ° C
Ts'ebetso e Phahameng ea Insulation: matla a ho senyeha ha enamel ≥1500V (bakeng sa bophara ba 0.5mm)
Taolo e Nepahetseng ea Boemo: Mamello ea bophara ba ± 0.002mm (0.1mm), ± 0.003mm (0.2mm/0.5mm)
Ho hanyetsa mocheso: Enamel e mamella ts'ebetso e tsoelang pele ho 180 ° C (sehlopha sa H se sireletsang)

Litlhaloso tsa Tekheniki

Tšobotsi	0.1mm bophara	0.2 mm bophara	0.5mm bophara
Nominal Diameter	0.1 limilimithara	0.2 limilimithara	0.5 limilimithara
Botenya ba Enamel	0.008-0.012mm	0.010-0.015mm	0.015-0.020mm
Kakaretso Diameter	0.116-0.124mm	0.220-0.230mm	0.530-0.540mm
Ho hanyetsa ho 20°C	25.8-26.5 Ω/m	6.45-6.65 Ω/m	1.03-1.06 Ω/m
Matla a tšepe	≥350 MPa	≥330 MPa	≥300 MPa
Elongation	≥20%	≥25%	≥30%
Khanyetso ea Insulation	≥10⁶ MΩ·km	≥10⁶ MΩ·km	≥10⁶ MΩ·km

Sebopeho sa Lik'hemik'hale (Manganin Core, Tloaelehileng%)

Element	Litaba (%)
Koporo (Cu)	84-86
Manganese (Mn)	11-13
Nickel (Ni)	2-4
Tshipi (Fe)	≤0.3
Silicon (Si)	≤0.2
Litšila ka Kakaretso	≤0.5

Litlhaloso tsa Sehlahisoa

Ntho	Tlhaloso
Boitsebiso ba Enamel	Polyimide (sehlopha sa H)
Mmala	Amber ea tlhaho (mebala e tloaelehileng e teng)
Bolelele ka Spool	500m (0.1mm), 300m (0.2mm), 100m (0.5mm)
Litekanyo tsa Spool	100mm bophara (0.1mm/0.2mm), 150mm bophara (0.5mm)
Sephutheloana	E koaletsoe ka mekotla e thibelang mongobo e nang le li-desiccants
Likhetho tse Tloaelehileng	Mefuta e khethehileng ea enamel (polyester, polyurethane), sehiloeng-bolelele

Lisebelisoa tse Tloaelehileng

Precision current shunts limtara tsa motlakase
Li-resistors tse tloaelehileng tsa lisebelisoa tsa calibration
Li-gauge tsa khatello le lisensara tsa khatello
Borokho ba Wheatstone bo nepahetseng haholo
Sefofane le lisebelisoa tsa sesole

Re fana ka traceability e feletseng bakeng sa sebopeho sa thepa le ts'ebetso ea ho hanyetsa. Mehlala ea mahala (bolelele ba 1m) le litlaleho tse qaqileng tsa liteko (ho kenyeletsoa le li-curve tsa TCR) lia fumaneha ha u kopa. Litaelo tse ngata li kenyelletsa tšehetso e ikemetseng ea matsoelintsoeke bakeng sa mela ea tlhahiso ea li-resistor.

E fetileng: Theko e Ntle ho Tsoa ho TANKII Feme Theko Fecral216 rod 0Cr20Al6RE

E 'ngoe: CO2 MIG Welding Wire Aws A5.18 Er70s-6 Argon Arc Welding Wire

Ngola molaetsa wa hao mona mme o re romele wona