China Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod/Bar Manufacture and Feme

Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod/Bar

Tlhaloso e Khutšoanyane:

Nomoro ea Mohlala:1j50

Lebitso la Brand:TANKII

Boitsebiso:Alloy e nepahetseng

Sebopeho sa Lik'hemik'hale:Ni50

Linear katoloso coefficient:9.2

Tekano:8.2

Ntlha ea Curie:500

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod/Bar

FeNi50 ke nickel-aron, alloy e bonolo ea makenete e nang le 50% nickel. Haholo-holo e sebelisoa libakeng tse peli, bakeng sa ho fetola matla le ho sebetsana le boitsebiso

Indastering ea matla, haholo-holo matla a khoheli a phahameng a na le induction e phahameng ea makenete le tahlehelo e tlase ea alloy. Indastering ea elektronike, haholo-holo ka motsoako o tlase kapa o mahareng o nang le matla a matla a khoheli le matla a tlase a qobelloang. Li-frequency tse phahameng li tla etsoa ka lesela le tšesaane kapa alloy e phahameng ea resistivity. Hangata ka lakane kapa hlobolisa.

Lisebelisoa tse bonolo tsa makenete e le phapanyetsano bakeng sa tšebeliso, ka lebaka la maqhubu a matla a khoheli a kentsoeng ka har'a thepa, ho baka tahlehelo, ho fokotseha ho hoholo ha alloy, botenya bo boholo, maqhubu a matla a matla a khoheli a phahameng, tahlehelo ea hona joale ea eddy e kholoanyane, matla a khoheli a fokotsa ho feta. Bakeng sa sena, lintho tse bonahalang tse lokela ho etsoa thinner lakane (theipi), 'me holim' a koahetsoeng ka lera insulating, kapa ho sebelisa mekhoa e itseng ho ea holimo ho theha oxide e insulating lera, alloys joalo ka tloaelo ho sebelisoa magnesium oxide electrophoresis barbotage.

Iron-nickel alloy haholo ts'ebelisong ea matla a khoheli, haholo bakeng sa tšepe ea joko, relay, li-Transformer tsa Matla a Nyenyane le tse sirelelitsoeng ka Magnetically.

Sebopeho sa Lik'hemik'hale

Sebopeho	%	C	P	S	Mn	Si	Ni	Cr	Cu	Fe
Litaba	min				0.30	0.15	49.0	-		Bal
Litaba	max	0.03	0.02	0.02	0.60	0.30	51.0	-	0.20	Bal

Thepa ea Magnetic

Kereiti	Spec	Sehlopha	D/mm	μ0.4/(mH/m)	μm/(mH/m)	Bs/T	Hc/(A/m)
Kereiti	Spec	Sehlopha	D/mm	≥			≤
1J50	Meqathatso e Cold Rolling	I	0.05-0.09	2.5	35.0	1.5	20.0
			0.10-0.19	2.9	40.0	1.5	14.4
			0.20-0.34	3.3	50.0	1.5	11.2
			0.35-0,50	3.8	62.5	1.5	9.6
			0.50-1.00	3.8	62.5	1.5	9.6
			1.10-2,50	3.5	56.3	1.5	9.6
		II	0.10-0.19	3.8	43.8	1.5	12.0
			0.20-0.34	4.4	56.3	1.5	10.4
			0.35-0,50	5.0	65.0	1.5	8.8
			0.51-1.00	5.0	50.0	1.5	10.0
			1.10-2,50	3.8	44.0	1.5	12.0
		III	0.05-0.20	12.5	75.0	1.52	4.8
	Leqhoa le Haretsoeng le Chesang	-	3-22	3.1	31.3	1.5	14.4
	Hot Rolled Bar	-	8-100	3.1	31.3	1.5	14.4

Mokhoa oa Phepelo

Lebitso la Alloys	Mofuta	Boemo
1J50	Sebaka	Dia = 8 ~ 100mm	L=50~1000

Thepa ea 'Mele

Boima ba 'mele (g/cm3)	8.2
Ho hanyetsa motlakase ho 20ºC (mm2/m)	0.45
Katoloso ya coefficient (10-6 ºC-1)	9.20
Ho hanyetsa (μΩ·m)	0.45
Curie point (ºC)	500
Saturation magnetostriction coefficient (10-6)	25.0
Sebaka se qhibilihang (ºC)	-