Alloy 52 e na le li-nickel le tšepe tse 48% ka indasteri indastering ea lingoloa tsa thelecom.it li boetse li fumana kopo ea lits'ebetso tse fapaneng tsa elektroniki, haholo-holo bakeng sa litiiso tsa khalase.
Alloy 52 ke e 'ngoe ea khalase ho litlolo tsa tšepe tsa tšepe tse hlophiselitsoeng ho sebelisoa ka likhalase tse fapaneng tse fapaneng. E tsejoang ka mokhoa o lekaneng oa keketseho ea metsi a batlang ho fihla ho 1050F (565 c).
Boholo ba boholo:
* Sheet-Komm-0.1mm ~ 40MM, bophara: ≤300mm, bophara: Ho chesa), bo khanyang
* Wire Round-Da 0.1mm ~ - Boemo
* Terata e sephara-Da 0.5mm ~ da 5.0, bolelele: ≤1000mm
* Bar-Da 5.0mm ~ - bolelele: ≤2000mm
Dia 8.0MM ~ Dia 32.0MM
DA 32.0MM ~ - - bolelele: ≤1300mm, maemo: ho chesa, ho chesa, ho chesa, ho chesa, ho chesa
* Capillary-O 3mmm ~ 1.0mm, id 0.1mm ~ 8.0mm ~ 8.0M
* Phala-O 120mm ~ 8.0mm ea 3.0mm ~ 129mm.
Chemistry:
Cr | Al | C | Fe | Mn | Si | P | S | Ni | Mg | |
Min | - | - | - | - | - | - | - | - | 50.5 | - |
Max | 0.25 | 0.10 | 0.05 | Bal. | 0.60 | 0.30 | 0.025 | 0.025 | - | 0.5 |
Karolelano ea Terata ea Kakaretso ea Linear Liner:
Keletso | α1 / 10-6ºC-1 | |||||||
20 ~ 100,5 | 20 ~ 200ºC | 20 ~ 300ºC | 20 ~ 350ºC | 20 ~ 400ºC | 20 ~ 450ºO | 60, 500ºC | 20 ~ 600ºC | |
4J52 | 10.3 | 10.4 | 10.2 | 10.3 | 10.3 | 10.3 | 10.3 | 10.8 |
LITLHAKISO:
Boemo | Approx. matla a tšepe | Approx. mocheso o sebetsang | ||
N / mm² | KSI | ° C | ° F | |
E pakiloe | 450 - 550 | 65 - 80 | ho fihlela +450 | ho fihlela +840 |
Ho huleloa ka thata | 700 - 900 | 102 - 131 | ho fihlela +450 | ho fihlela +840 |
Ho theha: |
Lello le na le pheko e ntle ebile e ka thehoa ka mokhoa o tloaelehileng. |
Welding: |
Wealding ka mekhoa e tloaelehileng e loketse leoto la sena. |
Phekolo ea mocheso: |
Alloy 52 e lokela ho phatlalatsoa ka 1500F e lateloe ke moea. Ho imolla khatello ea likhoka ho ka etsoa ho 1000f. |
Force: |
Ho lila ho lokela ho etsoa ka mocheso oa 2150 f. |
Ho bata |
Alloy e bata haholo. Mohato o tebileng o tebileng o lokela ho hlalosoa bakeng sa ts'ebetso eo e etsang ts'ebetso le sehlopha se patiloeng bakeng sa ho theha. |