Li-nickel tse hloekileng 200 / tse sa tsebeng letho ka Wire 0.25mm
Keletso: NI200, NI201, N4, N6
Holpigigity e phahameng
Khanyetso e ntle haholo
Matla a Molemo
Tlhaloso ea ALYLY
Nickel 200/201 e sebelisoa haholo ka kakaretso bakeng sa li-caps tse sebelisoang haholo, li-andes bakeng sa mekhahlelo ea elektroniki E boetse e sebelisoa foromong ea strip bakeng sa lits'ebetso tse fapaneng ho kenyelletsa betri-cd betries.
Boemo ba phepelo
Nickel 200, 201 le 205 li fanoa maemong a latelang:
Ho ne ho bata haholo, bohale bo khethehileng.
Ho bata ho bata, ho ile ha ata. Ho otloloha le ho fokotsa bolelele.
Hlokomela:
Nus n02201 (ASTM B 162) E tšoanang le N4 (GB / T 2054).
Nus n02200 (ASTM B 162) E tšoanang le N6 (GB / T 2054).
Liforomo
Coil - Strip, Foil, Ribbon
Terata - Profil, Round, Flat, sekwere
molamu, bar, tšoarela, poleiti, pampiri
Sebopeho sa lik'hemik'hale
Keletso | Ni + co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
Ni201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Boikarabello ba Matlooa a Guil ea Nickel
Keletso | Setukoane se hloekileng sa nickel 99.6% / 99.9% |
Botenya | 0.002 ho 2,50 mm |
Ho mamella | +/- 5% (Tolines e khethehileng ea fumaneha) |
Bophara | Ho fihla ho 350mm for |
SIZE SIZE | Ho fihla ho 80 kg ntle le welds |
Boteea | E ile ea amohela ka thata |
Setsebi sa sehlahisoa sa nickel foil
Botenya | Botenya tumello | Burr Bophahamo | Bophara ba bophara le mamello | |||||
2≤w <10 | 10≤ <50 | 50≤ <100 | 100 3≤w <150 | 150 Elew <200 | 200 3≤w | |||
0.02≤t <0,05 | 0.003 | ≤0.005 | ± 0.05 | 0.10 | ± 0,15 | ± 0.20 | 0.30 | 0 0,50 |
0.05≤t <0,1 | ± 0,005 | ≤0.01 | ||||||
0.1≤TT <0,2 | 0.008 | ≤0.015 | ||||||
0.2≤TT <0.3 | ± 0,012 | ≤0.02 | ||||||
0.3≤TT <0.4 | ± 0,015 | ≤0.03 | ± 0.10 | 015 | ± 0,25 | 0 0,50 | ± 0,80 | 1.00 |
0.4≤ <0,6 | ± 0,025 | ≤0.05 | ||||||
0.6≤t <0,8 | 0.030 | ≤0.06 | ± 0.30 | ± 0,40 | 0 0,50 | 0 0,50 | ± 0,80 | 1.00 |
0.8≤ <1.0 | ± 0,040 | |||||||
1.0≤ <1.2 | ± 0,050 | ≤0.08 | ± 0.50 | 0 0,50 | ± 0,80 | 1.00 | 1.00 | 1,50 |
1.2≤t <1.4 | ± 0,060 | |||||||
1.4≤TT <1.7 | 0.070 | ≤0.10 | ||||||
1.7≤t <2.0 | ± 0,080 |