Rea u amohela liwebsaeteng tsa rona!
Tankii 0.8mm CuMn8Ni Manganin Wire Wear Resistant Electrical Conductive Wire
Tlhaloso ea Sehlahisoa
Terata ea Manganin ea CuMn8Ni(Bophara ba 0.8mm)
Kakaretso ea Sehlahisoa
Terata ea manganin ea CuMn8Ni (bophara ba 0.8mm) e tsoang ho Tankii Alloy Material ke terata ea alloy ea koporo-manganese-nickel e nepahetseng haholo e nang le qetello e khanyang, e ts'oanang joalo ka ha ho bontšitsoe. E entsoe ka Cu (tekanyo) + 7.0–9.0% Mn + 1.0–2.0% Ni e nang le likarolo tse tsitsitseng tsa trace, e hlahisoa ka ho qhibilihisa vacuum, ho phutholla ho chesang, ho hula ka nepo ka makhetlo a mangata, le ho annealing ho laoloang. E na le coefficient ea mocheso o tlase haholo (TCR), resistivity e tsitsitseng, le ductility e ntle ea mechini, e etsang hore e be e loketseng li-resistors tsa wirewound tse nepahetseng, li-shunt tsa hajoale, li-gauge tsa khatello, le likarolo tsa lets'oao tse nang le maqhubu a phahameng tse hlokang botsitso ba nako e telele le ts'ebetso e tšepahalang.
Mekhoa e Tloaelehileng le Motheo oa Lintho tsa Bohlokoa
- Sehlopha sa motsoako: CuMn8Ni
- Litekanyo tsa Machaba:
- UNS: C18500
- DIN: 2.0870
- JIS: C1850
- GB/T: 3131-2019 (Mn8Ni)
- Tlhaloso ea Senotlolo: bophara ba 0.8mm (mamello: ± 0.005mm); bonolo/halofo e thata/e thata e fumaneha
- Sebopeho sa Lik'hemik'hale (boima%): Mn: 7.0–9.0%; Ni: 1.0–2.0%; Cu: ho leka-lekana; Fe ≤0.3%; Pb ≤0.05%; C ≤0.1%
- Maemo a Latelang: ASTM B124, EN 13602, GB/T 3131-2019, RoHS 2.0
- Moetsi: Tankii Alloy Material, e netefalitsoeng ho ISO 9001 le ISO 14001
Melemo ea Bohlokoa ba Motheo (E thehiloe holim'a terata e Nyenyane ea 0.8mm)
1. Tshebetso ea Motlakase e Tsitsitseng ka ho Fetisisa
- TCR e Tlase le Ho Ikemela ho Tsitsitseng: Ho Ikemela ho Tsitsitseng = 0.30 μΩ·m (20℃), TCR = ±8×10⁻⁶/℃ (0–100℃), ho netefatsa ho sisinyeha ha khanyetso ≤0.008%/℃—e leng ea bohlokoa bakeng sa ho lekanya ka nepo le lipotoloho tsa taolo.
- Ho Fokotsa Letšoao ka Tlase: Bophara ba 0.8mm bo leka-lekanya ho tsamaisa le ho tenyetseha, bo fokotsa tahlehelo ea lets'oao lits'ebetsong tsa maqhubu a phahameng le tsa ho lemoha ka nepo.
2. Thepa e Hloahloa ea Mekaniki le Tsamaiso
- Ho Sebetsa le ho Tenyetseha ho Hoholo: Matla a ho Tenyetseha ≥400 MPa (bohale bo thata) / ≥280 MPa (bohale bo bonolo), ho lelefatsa ≥25% (bohale bo bonolo), ho tshehetsa ho kobeha ho thata (bonyane radius ≥1.6mm) le ho bopa ho rarahaneng ntle le ho robeha.
- Bokaholimo bo Khanyang le Bokgoni bo Botle ba ho Kopana: Qetello e khanyang e bentšitsoeng (Ra ≤0.6μm) e netefatsa khanyetso e tlase ea ho kopana le ho kopanya ka mokhoa o tšepahalang, e loketseng bakeng sa ho phetholla ha resistor le likhokahano tsa terminal.
3. Ho senyehe hantle le ho hanela tikoloho
- Ho Hanela Tshenyo e Sepakapakeng le e Bobebe: E etsa filimi e teteaneng ya oxide, e feta teko ya ho fafatsa letsoai ya ASTM B117 ya dihora tse 500 ntle le tshenyo e totobetseng.
- Mocheso o Sephara oa Ts'ebetso: -40℃ ho isa ho 130℃, ts'ebetso e tsitsitseng libakeng tsa indasteri, likoloi le lisebelisoa tsa elektroniki.
Litlhaloso tsa Tekheniki
| Tšobotsi | Boleng (Bo Tloaelehileng) |
|---|---|
| Kereiti ea motsoako | CuMn8Ni (bonolo/halofo e thata/bohale bo thata) |
| Bophara | 0.8mm (± 0.005mm, e ka fetoloang ho tloha ho 0.1–3.0mm) |
| Ho hanyetsa (20℃) | 0.30 μΩ·m |
| TCR (0–100℃) | ±8×10⁻⁶/℃ |
| Matla a tšepe | ≥400 MPa (e thata); ≥280 MPa (e bonolo) |
| Ho lelefatsa | ≥25% (bohale bo bonolo) |
| Boima (HV) | 110–140 (e thata); 75–95 (e bonolo) |
| Botenya | 8.88 g/cm³ |
| Qetello ea Bokaholimo | E bentšitsoeng ka khanya (Ra ≤0.6μm) |
| Mocheso o sebetsang | -40℃ ho isa ho 130℃ |
Litlhaloso tsa Sehlahisoa
| Ntho | Tlhaloso |
|---|---|
| Foromo ea Phepelo | Li-spool (1kg/5kg/10kg ka spool) |
| Bohale | E bonolo (e koahetsoeng), E thata ka halofo, E thata (ha e huloa) |
| Phekolo ea Bokaholimo | E bentšitsoeng ka mokhoa o khanyang, e qhibilihisitsoeng, kapa e kenngoeng ka makotikoting (ha ho hlokahale) |
| Ho sebetsa habonolo | Ho kobeha, ho kobeha, ho soldera, ho tjheseletsa ka laser |
| Sephutheloana | Polasetiki + filimi ea PE + lebokose (thibela-oksidation le tšenyo) |
| Ho iketsetsa | Bophara (0.1–3.0mm); bolelele; bohale; kalafo ea bokaholimo |
Maemo a Tloaelehileng a Kopo
- Li-resistor tse Nepahetseng: Li-resistor tse nepahetseng tsa terata, li-potentiometer, le marokho a Wheatstone bakeng sa li-multimeter le li-analyzer tsa matla.
- Li-shunt tsa Hona Joale: Li-shunt tsa hona joale tse mahareng bakeng sa litsamaiso tsa taolo ea libeteri (BMS), limithara tsa motlakase, le lisebelisoa tsa elektroniki tsa likoloi.
- Di-Gauge tsa Kgatelelo le Di-Sensor: Thepa ya mantlha bakeng sa teko ya kgatello ya metjhini le di-sensor tsa puseletso ya mocheso.
- Lisebelisoa tsa Elektroniki tse Phahameng ka ho Fetisisa: Li-module tsa ho lokisa matšoao, lipotoloho tsa RF, le likarolo tsa impedance tse nepahetseng.
Ngola molaetsa oa hau mona 'me u o romelle ho rona
-
Mohala
-
Imeile
-
WhatsApp
-
WeChat
Judy
150 0000 2421
-
Holimo