Uns N14052 / 4j52 / Nife52 / Katoloso / Precision Alloy Wire
Alloy 52 E na le 52% nickel le 48% ea tšepe 'me e sebelisoa haholo indastering ea likhokahano.E boetse e fumana kopo mefuteng e mengata ea lisebelisoa tsa elektronike, haholo-holo bakeng sa litiiso tsa khalase.
Alloy 52 ke e 'ngoe ea li-alloys tse tiisang tsa tšepe tse etselitsoeng ho sebelisoa ka likhalase tse bonolo tse fapaneng. E tsebahala ka coefficient ea katoloso ea mocheso e batlang e lula e fihla ho 1050F (565 C).
Boholo ba mefuta:
*Letlapa-Botenya 0.1mm ~ 40.0mm, bophara: ≤300mm, Boemo: serame se pota-potiloeng (ho chesa), se khanyang, se khanyang
*Mohala o chitja-Dia 0.1mm~Dia 5.0mm, Boemo: ho huleloa ho bata, ho khanyang, ho khantšitsoe
*Mohala o bataletseng-Dia 0.5mm~Dia 5.0mm, bolelele: ≤1000mm, Boemo: flat rolled, e khanyang annealed
*Bara-Dia 5.0mm~Dia 8.0mm, bolelele: ≤2000mm, Boemo: ho huloa ho batang, ho khanyang, ho khanyang
Dia 8.0mm~Dia 32.0mm, bolelele: ≤2500mm, Boemo: ho chesa, ho khanyang, ho khanyetsa
Dia 32.0mm~Dia 180.0mm,bolelele:≤1300mm,Maemo:ho tjhesa ho qhekella,ebole,ho reteleha,ho tjheswa ho phekolwa
* Capillary-OD 8.0mm ~ 1.0mm, ID 0.1mm ~ 8.0mm, bolelele: ≤2500mm, Boemo: e huleloa ka serame, e khanyang, e khanyang annealed.
*Pipe-OD 120mm ~ 8.0mm, ID 8.0mm ~ 129mm, bolelele: ≤4000mm, Boemo: e huleloa ka serame, e khanyang, e khanyang annealed.
Khemistri:
| Cr | Al | C | Fe | Mn | Si | P | S | Ni | Mg | |
| Min | - | - | - | - | - | - | - | - | 50.5 | - |
| Max | 0.25 | 0.10 | 0.05 | Bal. | 0.60 | 0.30 | 0.025 | 0.025 | - | 0.5 |
Kakaretso ea Khoeli ea Katoloso ea Linear:
| Kereiti | α1/10-6ºC-1 | |||||||
| 20 ~ 100ºC | 20-200ºC | 20-300ºC | 20 ~ 350ºC | 20 ~ 400ºC | 20 ~ 450ºC | 20 ~ 500ºC | 20 ~ 600ºC | |
| 4J52 | 10.3 | 10.4 | 10.2 | 10.3 | 10.3 | 10.3 | 10.3 | 10.8 |
Thepa:
| Boemo | Hoo e ka bang. matla a tšepe | Hoo e ka bang. mocheso o sebetsang | ||
| N/mm² | ksi | °C | °F | |
| Annealed | 450 - 550 | 65-80 | ho fihlela ho +450 | ho fihlela ho +840 |
| E Ratiloe ka Thata | 700-900 | 102 - 131 | ho fihlela ho +450 | ho fihlela ho +840 |
| Ho theha: |
| Alloy e na le ductility e ntle mme e ka thehoa ka mekhoa e tloaelehileng. |
| Welding: |
| Welding ka mekhoa e tloaelehileng e loketse bakeng sa motsoako ona. |
| Kalafo ea Mocheso: |
| Alloy 52 e lokela ho haneloa ka 1500F e lateloe ke moea o pholileng. Ho fokotsa khatello ea mahareng ho ka etsoa ka 1000F. |
| Ho qapa: |
| Ho fafatsa ho lokela ho etsoa ka mocheso oa 2150 F. |
| Ho sebetsa ho batang: |
| The alloy e bonolo ho sebetsa. Merero e tebileng ea ho taka e lokela ho hlalosoa bakeng sa ts'ebetso eo ea ho theha le kereiti e kenyelletsoeng bakeng sa ho theha kakaretso. |
