Terata ea China ea 0.01mm Ultra Fine Enameled CuNi44 Constantan bakeng sa Lisebelisoa tsa ho Hanela ho Sebetsa ka ho Sebetsa le Fektheri

0.01mm Ultra Fine Enameled CuNi44 Constantan Wire bakeng sa Litšebeliso tsa ho Hanela ka ho Sebetsa Setšoantšo se Hlahisitsoeng

0.01mm Ultra Fine Enameled CuNi44 Constantan Wire bakeng sa Likopo tsa ho Hanela ka ho Sebetsa

Tlhaloso e Khutšoanyane:

0.01mm Enameled CuNi44 Constantan Micro Wire e fana ka khanyetso e tsitsitseng ea motlakase, ho tenyetseha ho babatsehang le ho thibela mocheso ho tšepahalang bakeng sa likarolo tsa elektroniki le li-sensor tse nepahetseng.

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

0.01mm Ultra Fine Enameled CuNi44 Constantan Wire bakeng sa Likopo tsa ho Hanela ka ho Sebetsa

Tlhaloso ea Sehlahisoa

Terata ea Constantan ea 0.01mm e nang le enamel e ntle haholo ea CuNi44 Constantan ke terata ea alloy e hanyetsang ka nepo e entsoeng ka alloy ea koporo ea nickel CuNi44 (6J40). Ka botsitso bo botle ba motlakase, coefficient e tlase ea ho hanyetsa mocheso le ho tenyetseha ho ikhethang, e etselitsoe lits'ebetso tse nepahetseng haholo tse hlokang boholo bo bonyenyane le ts'ebetso e tšepahalang.

Terata e ka fanoa ka litsamaiso tse fapaneng tsa ho thibela enamel ho kenyeletsoa Polyester (PE), Polyester-imide (PEI), Polyimide (PI) le Polyamide-imide (PAI), tse fanang ka maemo a fapaneng a ho hanyetsa mocheso, matla a mechini le botsitso ba lik'hemik'hale.

Ka lebaka la bophara ba eona bo bobebe haholo le bokhoni bo botle ba ho e sebetsana, terata ena ea Constantan e nang le enamel e sebelisoa haholo lisebelisoa tsa bongaka, li-micro sensor, li-resistor tse nepahetseng, likarolo tsa elektroniki, lisebelisoa tsa ho lekanya le lits'ebetso tse ling tse tsoetseng pele.

Tlhōrō ea Insulation:

1) Terata ea ho hanyetsa polyester, sehlopha sa 130

2) Terata e fetotsoeng ea ho hanyetsa polyester, sehlopha sa 155

3) Terata ea ho hanyetsa polyesterimide, sehlopha sa 180

4) Polyester (imide) e koahetsoeng ka terata ea ho hanyetsa polyamide-imide, sehlopha sa 200

5) Terata ea ho hanyetsa Polyimide, sehlopha sa 220

		Constantan 6J40	Constantan e Ncha	Manganin	Manganin	Manganin
			6J11	6J12	6J8	6J13
Li-elemente tse ka Sehloohong tsa Lik'hemik'hale %	Mn	1~2	10.5~12.5	11~13	8~10	11~13
	Ni	39~41	-	2~3	-	2~5
	Cu	PHOMOLLO	PHOMOLLO	PHOMOLLO	PHOMOLLO	PHOMOLLO
			Al2.5~4.5 Fe1.0~1.6		Si1~2
Mefuta ea Mocheso bakeng sa Likaroloana		5~500	5~500	5~45	10~80	10~80
Botenya		8.88	8	8.44	8.7	8.4
g/cm3
Ho hanyetsa		0.48	0.49	0.47	0.35	0.44
μΩ.m,20		± 0.03	± 0.03	± 0.03	± 0.05	± 0.04
Katoloso		≥15	≥15	≥15	≥15	≥15
%Φ0.5
Khanyetso		-40~+40	-80~+80	-3~+20	-5~+10	0~+40
Thempereichara
Khoutu
α,10 -6 /
Thermoelectromotive		45	2	1	2	2
qobella ho ea Koporong
μv/(0~100)

Tpye ea terata e se nang letho

sehlooho thepa mofuta		Cuni1	CuNI2	CuNI6	CuNI10	CuNi19	CuNi23	CuNi30	CuNi34	CuNI44
sehlooho lik'hemik'hale sebopeho	Ni	1	2	6	10	19	23	30	34	44
	MN	/	/	/	/	0.5	0.5	1.0	1.0	1.0
	CU	phomolo	phomolo	phomolo	phomolo	phomolo	phomolo	phomolo	phomolo	phomolo
boholo ho sebetsa mocheso		/	200	220	250	300	300	350	350	400
bongata g/cm3		8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9
ho hanyetsa ho 20 °c		0.03 ± 10%	0.05 ± 10%	0.1 ± 10%	0.15 ± 10%	0.25 ± 5%	0.3 ± 5%	0.35 ± 5%	0.40 ± 5%	0.49 ± 5%
mocheso karolelano ea khanyetso		<100	<120	<60	<50	<25	<16	<10	-0	<-6
ho tsitlella matla a mpa		>210	>220	>250	>290	>340	>350	>400	>400	>420
ho lelefatsa		≥25	≥25	≥25	≥25	≥25	≥25	≥25	≥25	≥25
ho qhibiliha ntlha °c		1085	1090	1095	1100	1135	1150	1170	1180	1280
karolelano ea ho khanna		145	130	92	59	38	33	27	25	23