Rea u amohela liwebsaeteng tsa rona!
Cu-Ni motsoako futhumatsang terata CuNi1 resistance terata
Joalo ka moetsi e moholo le morekisi kantle ho naha China moleng oa alloy resistance alloy, re ka fana ka mefuta eohle ea
terata ea alloy ea motlakase le likhoele (terata ea tšepe e hanyetsanang le likhoele),
Boitsebiso:CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
Tlhaloso e Akaretsang
Ka lebaka la ho ba le matla a phahameng a tsitsipano le boleng bo eketsehileng ba ho hanyetsa, lithapo tsa nickel alloy ke khetho ea pele.
bakeng sa lits'ebetso joalo ka lithapo tsa ho hanyetsa.Ka palo e fapaneng ea nickel lethathamong lena la lihlahisoa, litšobotsi
ea terata e ka khethoa ho latela litlhoko tsa hau.Mehala ea koporo ea nickel alloy e fumaneha joalo ka terata e se nang letho,
Litaba tsa Lik'hemik'hale, %
| Ni | Mn | Fe | Si | Cu | Tse ding | Tataiso ea ROHS | |||
| Cd | Pb | Hg | Cr | ||||||
| 1 | - | - | - | Bal | - | ND | ND | ND | ND |
Thepa ea Mechini
| Max Continuous Service Temp | 200ºC |
| Resisivity ho 20ºC | 0.03±10%ohm mm2/m |
| Botenya | 8.9g/cm3 |
| Thermal Conductivity | <200 |
| Melting Point | 1090ºC |
| Matla a Tensile,N/mm2 Annealed,Soft | 140 ~ 310 Mpa |
| Matla a Tsitsitseng,N/mm2 Cold Rolled | 280 ~ 620 Mpa |
| Elongation(anneal) | 25%(metsotso) |
| Elongation (e batang e phuthoa) | 2%(mets) |
| EMF vs Cu, μV/ºC (0~100ºC) | -12 |
| Sebopeho sa Micrographic | austenite |
| Thepa ea Magnetic | E seng |
Ngola molaetsa wa hao mona mme o re romele wona
