Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding

Tlhaloso e Khutšoanyane:

Sekotwana sa alloy sa CuNi44 constantan (Copper-Nickel 55/44), coefficient e tlase ea ho hanyetsa mocheso (TCR < ±40 ppm/°C), EMF e phahameng ea mocheso khahlanong le koporo. E loketse li-resistors tse nepahetseng tsa terata, li-thermocouple, le li-electrode tsa ho tjheseletsa tse hanyetsang. Botenya ho tloha ho 0.1mm ho isa ho 3.0mm, bophara ho fihlela ho 300mm. Ho khona ho sotheha hantle le ho hanyetsa ho bola.


  • Sehlopha sa motsoako:CuNi44 (Constantan)
  • Sebopeho:Cu ~55%, Ni ~44%, Mn ~1%
  • TCR (±40 ppm/°C):≤ ±40 ppm/°C (20-60°C)
  • Ho hanyetsa:0.49 μΩ·m @20°C
  • EMF ea Thermal khahlanong le Cu:~42 μV/°C (0-100°C)
  • Qaqiso ea Sehlahisoa

    LBH

    Li-tag tsa Sehlahisoa

    Tlhaloso ea Sehlahisoa

    Cuni44 CU-NI-Mn Koporo Nickel Alloy khanyetso Constantan Strip
    (Lebitso le Tloaelehileng:Constantan CuNi44,NC50.Cuprothal, Alloy 294, Cuprothal 294, Nico, MWS-294, Cupron, Copel, Alloy 45, Neutrology, Advance, CuNi 102, Cu-Ni 44, Konstantan,)

    Cuni44ke motsoako oa koporo-nickel (motsoako oa Cu56Ni44) o khetholloang ka ho hanyetsa motlakase haholo, ho ductility e phahameng le ho hanyetsa mafome hantle. E loketse ho sebelisoa mochesong o fihlang ho 400°C.
    Ditshebediso tse tlwaelehileng bakeng sa CuNi44 ke di-potentiometer tse tsitsitseng mochesong, di-rheostat tsa indasteri, di-electrical motor starter resistances le strain gauge.
    Motsoako oa coefficient e fokolang ea mocheso le resistivity e phahameng e etsa hore motsoako o lokele haholo bakeng sa ho kobeha ha li-resistor tse nepahetseng.
    CuNi44 e entsoe ka koporo ea electrolytic le nickel e hloekileng. Ka boholo ba terata e tšesaane, motsoako o khethoa e leCuni45(Thermocouple).
    Tlhaloso ea Sehlahisoa

    Constantan Strip e nang le resistivity e itekanetseng le coefficient e tlase ea khanyetso e nang le khanyetso e bataletseng/mocheso o kobehileng holim'a mefuta e mengata ho feta "manganins". Constantan e boetse e bontša khanyetso e betere ea mafome ho feta man ganins. Ts'ebeliso e atisa ho lekanyetsoa ho lipotoloho tsa ac.

    Constantan hape ke karolo e mpe ea thermocouple ea mofuta oa J moo Tšepe e leng ntho e ntle; li-thermocouple tsa mofuta oa J li sebelisoa lits'ebetsong tsa ho phekola mocheso. Hape, ke karolo e mpe ea thermocouple ea mofuta oa T e nang le OFHC Copper e ntle; li-thermocouple tsa mofuta oa T li sebelisoa mochesong oa cryogenic.

    Dikahare tsa Khemikhale, %

    Ni Mn Fe Si Cu Tse ling Tataiso ea ROHS
    Cd Pb Hg Cr
    44 1.50% 0.5 - Bala - ND ND ND ND

    Matlotlo a Mekaniki

    Tempera e Phahameng ea Tšebeletso e Tsoelang Pele 400ºC
    Ho tsitsa ha mocheso ho 20ºC 0.49±5%ohm mm2/m
    Botenya 8.9 g/cm3
    Ho khanna ha mocheso -6(Boholo)
    Sebaka sa ho Qhibiliha 1280ºC
    Matla a ho Tenyetseha, N/mm2 e tšehelitsoeng, e bonolo 340~535 Mpa
    Matla a ho Tenyetseha, N/mm3 e Menoang ka Serame 680~1070 Mpa
    Ho lelefatsa (ho eketsa) 25% (Bonyane)
    Ho lelefatsa (ho phutholohile ka serame) ≥Bonyane)2% (Bonyane)
    EMF khahlanong le Cu, μV/ºC (0~100ºC) -43
    Sebopeho sa Micrographic austenite
    Thepa ea Magnetic Hase

    Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding

    Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding
    Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding
    Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding
    Sekotwana sa Nickel sa Koporo sa CuNi44 / Constantan, Sekotwana sa Alloy bakeng sa Diresistors le ho Welding


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa oa hau mona 'me u o romelle ho rona